Close
Skip To Content

Catalog


High Efficiency, Long Life Cartridges for Industrial Fluids
  • Large Surface Area - Allows high flow rate with low initial pressure drop and maximum contaminant holding capacity.
  • Resin Impregnated Media - Maintains strength, resists effects of water and heat.
  • 75 psi Collapse Strength - Heavy gauge carbon steel endcaps and center tube give safety margin against pressure surges.
  • Coated Steel Components - Resist corrosion from most industrial fluids.
  • Corrugated Media - Prevents pleat pinch-off, assuring all filtration media is utilized.
  • Buna-N Gaskets - The best general gasket material available assures positive seal in most fluids.
  • Thermoset Bonding Material - Durable endcap-to-media bond prevents internal bypassing.
  • 98%+ Filtration Efficiency - Micron Ratings from 1/2 to 75 available.
  • Threaded base filter elements - Available for easier installation.
  • 98%+ Nominal filtration efficiency
  • 5 - 9 Operating pH range
  • 250°F Maximum operating temperature
  • Recommended changeout differential pressure - 25 psid
  • Micron ratings from 1/2 to 75
  • Multi-pass (Beta Ratio)
For information about Flow Ratings with various viscosity fluids, refer to Flow Ratings Information Form.
Unit of Measure
Items
Fo-614-PLF

Fo-614-PLF

Fo-614-PLF

Fo-614-PLF

Fo-614-PLF
Nominal Micron Rating N/A 1/2 N/A 1 N/A 1 N/A 2 N/A 5
Max. Operating Temperature N/A 250 ºF
Dimensions N/A 6" x 14 1/2" x 3 1/2" ID
Perforated Outer Wrap N/A No N/A No N/A Yes N/A No N/A No
Replaces Facet/Fram Quantek N/A C-614-0.5PL N/A C-701-1 N/A MP1L N/A C-701, C-763-1, MP2L N/A CH-57PL, MP5L
Replaces Bowser/Keene Kaydon N/A N/A N/A BP-614-3 N/A N/A
Nominal Filtration Efficiency N/A >98 %
Operating pH range N/A 5-9
Micron Ratings N/A 1/2 to 75
Recommended Differential Pressure N/A 25 psid
Collapse Strength N/A 75 psi
Applications N/A Velcon Pleated Media Cartridges are suitable for a broad range of polar and non-polar fluids. Recorations where the contaminant is granular (non-colloidal), allowing maximum utilization of the high surface area.
  • All Hydrocarbon Fuels
  • Water Emulsion Coolants
  • Insulating Oils
  • Cutting Oils
  • Naphtha
  • Toluol
  • Glycols
  • Lube Oils
  • Synthetic Oils
  • Degreasing Fluids
  • Ethyl Alcohol
  • Hydraulic Oils